Halaman utama Jelajahi Bantuan
Daftar Masuk
kyle
/
esr-meter
1
0
Fork 0
Berkas Masalah 0 Permintaan Tarik 0 Wiki

minimal component esr meter to test capacitors in circuit

Pohon: 88c959c8e6
Ranting Tag
esr-meter
ZIP TAR.GZ
Your Name 88c959c8e6 commit 4 tahun lalu
enclosure e298a33f0f add some notes about the enclosure that I am using for the project 4 tahun lalu
pictures 194e71c405 fixed manhattan ref image 4 tahun lalu
troubleshooting beb67997b2 add measurements of meter body 4 tahun lalu
.gitignore 966becd5e5 ignore all vim temp files 4 tahun lalu
Log-Amp-Basics-MT-077.pdf 5d9bbb455e finished manhattan esr - verified all components are placed 4 tahun lalu
README.md 88c959c8e6 commit 4 tahun lalu
manhattan.svg 5d9bbb455e finished manhattan esr - verified all components are placed 4 tahun lalu
rms-to-dc-conversion-just-got-easy-linear-tech-dn288f.pdf 5d9bbb455e finished manhattan esr - verified all components are placed 4 tahun lalu
schematic-notes.xcf 5d9bbb455e finished manhattan esr - verified all components are placed 4 tahun lalu

README.md

ESR Meter

John Barnes - AKA Jay_Diddy_B designed an ESR meter based on 5 transistors.

Critical Componenets

It looks like the transistors are mostly jellybean NPN and PNP parts. There is one set glass passivated rectifiers that are used to short accidental residual charge on the dut caps. Although if the caps are discharged then those are not needed. The circuit also needs a 50uA meter. The 1N5711 low forward voltage Schottky diodes seem to be going out of style. The datasheet for those claim 200mV at room temperature.

Manhattan Construction

Just to test the circuit I am going to construct a prototype and possibly test some of the more critical components like the low forward voltage diode 1N5711.
manhattan

Using my 6mm pad cutter I think a copper board of 60mm * 45mm should be enough to get all the pads in.

The 50uA meter needs a 50mm recess into a box. It measures 63mm x 56mm. There is a 32mm diameter protrusion at the base of the meter, so technically the meter does not need the entire 50mm recess.

Label:
B5C1
GB7676-98
DC class 2.5% accuracy

           63mm
 ____________________________
/___________________________/|
|         20     30         ||
|     10             40     ||
|  0        uA          50  ||
|      `-.                  ||
|         `-.               ||  56mm
|          ,-````-,         ||
|___________________________||
| (x)                   (x) ||
|            (\)            ||
|___________________________|/
front of meter
             ____     ___
              /      /  /|
             /      /  / |
            /      /  /  |
         63mm     /  /   |
          /      /  /    |
         /      /  /     |
      __/_     /  /      |
      _ _     /__/       ====                        ___
       |      |  |       ------------------\          | 
       |      |  |     #  `  .  `  .  `  .  |         |
       |      |  |    #/#/#/#/#/#/#/#/#/#  /====      |
       |      |  |   ###################     |       32mm
     56mm     |  |   #|#|#|#|#|#|#|#|#|#  /====       |
       |      |  |   # -----------------    |         |
       |      |  |    # ` ./###############/         _|_
       |      |  |=====
       |      |  | /
      _|_     |__|/

spring and coil of movement